Ormus is a wonderful product helping many to get rid of their health and psychic problems.
The ways of making Ormus are :
- THE WET METHOD
- THE DRY METHOD
- BOILING METHOD
All of the THREE METHODS shall be prepared carefully in the laboratory and use a chemical lab
technique called "measuring pH", it measures the acid/base ratio.
If the value of
- pH < 7 indicates acid
- pH = 7 indicates neutral
- pH > 7 indicates base or alkaline in nature like lye
ORMUS can precipitate between the pH of 8.5 and 10.78.
MAKING ORMUS WET METHOD
WET METHOD is the simpliest to perform :
|1. Take some drinking water or clean sea
2. Add slowly the solution of lye mixed with water so that raises
3. A white fluffy precipitate is formed which you allow to settle
4. The liquid above the precipitate should be removed.
5. Now thoroughly wash the precipitate which is calcium hydroxide,
magnesium hydroxide, and a small amount of m-state material.
MAKING ORMUS DRY METHOD
| The DRY METHOD for making ORMUS
|1. Take dry mineral powder.
2. Boil the dry mineral power in lye water at pH 12.
3. Now filter and discard the precipitate.
4. Distilled white vinegar or hydrochloric acid (HCl) to be added to the
filtered liquid to lower the pH to 8.5.
5. Allow the precipitate to settle overnight.
6. Remove the liquid above the precipitate.
7. Now thoroughly wash the precipitate i.e. calcium hydroxide, magnesium
hydroxide and a small amount of m-state material.
MAKING ORMUS BOILING METHOD
| Making of ORMUS by BOILING GOLD METHOD :
|1. Gold dust should be boiled in the lye
2. Any solids that are present should be filtered out.
3. Distilled white vinegar or HCl to the remaining liquid to lower the pH
4. Allow the precipitate to settle overnight.
5. The liquid above the precipitate should be removed.
6. Now wash the precipitate which is almost pure gold m-state
MAKING ORMUS M-STATE
There are also necessary supplies to make the m-state. Hence the making of ORMUS is explained above.
Search our Web site for more information on MAKING ORMUS